Cabinet Design Software With a Cutlist, Free in Open Beta
Most cabinet software will draw you a cabinet. The question worth asking is what happens next: whether the parts come out of the drawing you made, whether the sizes account for the machine you own, and whether the file that leaves can be read by the thing that has to read it. Here are five ways to test that in anything you try, and what CabDesign does about each one.
The short version
A cut list is only worth having if it came from the design and knows about your shop. Five things decide that, and every one of them is testable in about ten minutes on a job you already know the answer to.
| 1. Part sizes | Do they follow the construction you set, or a template somebody else chose? |
|---|---|
| 2. The cabinet column | Does each part row say which box it belongs to? |
| 3. Your stock | Does the nesting use the sheet sizes you buy and the offcuts you already own? |
| 4. Allowances | Is the printed size the size to cut, with the width of the cut and the edgebanding taken off? |
| 5. The file out | Can the next station read it, in a shape that holds still between versions? |
On this page
What "with a cut list" should mean
The phrase gets used for two quite different things, and the difference is worth a minute of your time.
The weaker version is a report. You draw a cabinet, you press a button, and a list of rectangles appears. It is genuinely useful and it is where most people start. What it cannot do is know anything about your shop: the blade in your saw, the sheet you buy, the pile of offcuts by the door, the band you put on an exposed edge.
The stronger version is a chain. The design produces parts, the parts get arranged on the stock you actually own, the arrangement accounts for the width of the cut and the thickness of the band, and what leaves is a file the next station can act on. Every link is derived from the one before it, so changing the cabinet changes the sheet count without anybody retyping anything.
Both get described with the same four words in a feature list. Only the second one saves you a sheet.
Five things to test
Try these on any tool, including this one. Use a job you have already built, because you know what the answer should be.
1. Where do the part sizes come from?
Change one construction decision and see what moves. Make the sides run to the floor instead of sitting on the bottom. If the side height and the bottom width both change, the software is deriving parts from your construction. If nothing moves, the sizes came from a template and they are correct for a shop that is not yours.
2. Does a part row name its cabinet?
Sort the list by cabinet. Two boxes on the same job are often both called Upper, and a list that cannot tell them apart hands the bench two piles it has to guess between. That column is the difference between cutting a whole kitchen in one run and cutting one box at a time.
3. Does the nesting use your stock?
Put your real sheet size in and check it survives. A metric 4 by 8 panel is 2440 by 1220 mm, which is 96 1/16 in by 48 1/32 in, and a plan that quietly rounds that to 96 in is planning against a sheet nobody sells. Then look for the offcuts: the rack beside the machine is inventory you have already paid for, and a nester that can be told about it is the one that saves you money.
4. Is the printed size the cut size?
Find a part with edgebanding on one edge and compare the number to the finished size. A part finished at 600 mm with a 1 mm band on one long edge should print at 599 mm. Then open the kerf setting and compare it to the blade or the bit currently in the machine. A default kerf is a description of somebody else's tooling, and the error accumulates along a sheet until the last part in a row does not fit.
5. Can the next station read the file?
Export once and open the file in the thing that has to open it. Then ask the quieter question: will the same export next month have the same columns in the same order? An import mapping you set up once in the receiving program is worth protecting, and a file whose shape moves between versions breaks it silently.
How CabDesign answers each one
Every claim in this section was read out of the shipped code, and the file and line for each one sits in a comment beside it in this page's source.
| Part sizes | The Designer holds the room and the cabinets in floor plan, elevation and 3D, and the parts are derived from that geometry, so a cabinet you resize is a parts list that already moved |
|---|---|
| The cabinet column | Every part row carries the cabinet it belongs to, and the export layer keeps two boxes with the same name apart |
| Your stock | Sheet size, thickness and grain belong to the material in the Materials Library and travel with it. The Cut List Optimizer reaches for your offcuts before it opens a new sheet |
| Allowances | The Optimizer takes the width of the cut and the edgebanding into account when it nests, and holds the grain direction you choose, starting from a default you can change |
| The file out | Three export profiles, each carrying a version in its id, so the mapping the receiving program remembers keeps working |
The nesting is an edge-to-edge cut pattern, which is what a panel saw can physically follow: a layout made of full-width strips rather than shapes dropped into the middle of a sheet. What that constraint costs in yield, and what it buys, is the sheet nesting guide.
The three files that leave
| Spreadsheet import (CSV) | Every part as a row: material, description, width, length, quantity, cabinet, grain. Opens in any spreadsheet |
|---|---|
| Cut station parts list | One row per distinct cut, grouped by quantity and sorted by material then longest first, with lengths in both millimeters and inches to a sixteenth |
| Nested sheets drawing (DXF) | The nested sheet layout as a drawing: sheet outline, every piece as a labeled rectangle. Opens in any CAD or DXF viewer, including the CAM software a CNC shop already owns |
An export and the screen it came from read the same source, so the two cannot disagree, and the bytes each profile writes are pinned by a stored reference file that a test compares against on every change. That is the mechanism behind the promise in row five: your import mapping is protected by the version in the profile id.
Work you already have comes in as well as out. Part rows paste straight into the Optimizer, tab separated or comma separated, under a header of Label, Width, Length, Qty, Type and Grain. Your own stock list comes into the Materials Library as a CSV. What gets built here once is your cabinet library and your construction standard, which for a shop working to the 32mm system is a set of decisions you already know by heart.
What free means here
Both CabDesign and StackDesign are free during the open beta, with no card to enter. The pricing page is the only place a price or a date is stated, and it carries both, along with what the plans look like afterwards. Keeping them in one place is deliberate: a number retyped onto a second page is a number that goes stale.
Five smaller tools run with nothing signed in at all, entirely in your browser: board feet, material cost, the Salice hinge calculator, the Gola profile configurator, and spec photo to cut list. The Designer and the Cut List Optimizer keep your project against your account, which is why those two ask you to sign in.
Where to start
Pick the door that matches what you came for.
| I want to draw a kitchen | Open the Designer, and the step by step if you want the order to do it in |
|---|---|
| I already have a parts list | Paste it into the Cut List Optimizer and see what it does with your sheets |
| I want the arithmetic explained first | What a cut list calculator is actually doing |
| I want to know the words | The glossary: overlay, reveal, the 32mm system, Gola, edgebanding and scribe |
Start with a job you already built. You know what the sheet count should be, which makes it the fastest way to find out whether any of this is true.
Common questions
Is there free cabinet design software with a cutlist?
CabDesign is free during its open beta, with no card, and the cut list is part of the same job you draw rather than a separate purchase. The pricing page is the only place a price or a date is stated, and it carries both. Five smaller tools run with nothing signed in at all: board feet, material cost, the Salice hinge calculator, the Gola profile configurator, and spec photo to cut list.
What should cabinet design software with a cutlist actually give me?
Five things, and they are worth testing one at a time. Part sizes that come from the construction you set rather than a fixed template. A parts list that names the cabinet each part belongs to. Sheet nesting that uses the stock and the offcuts you actually own. Allowances for the width of the cut and for edgebanding, so the printed size is the size to cut. And a file the next station can read, in a shape that holds still between versions.
Does it run in a browser?
Yes. There is nothing to install and no seat to move between machines. You sign in and your projects are stored against your account, so the same job opens on the shop computer and the office one. A desktop or tablet screen is what the layout is built for.
What comes out at the end?
Three export profiles, each versioned so the receiving program's saved import mapping keeps working: a spreadsheet CSV with every part as a row, a cut station parts list sorted by material then longest first, and a DXF drawing of the nested sheets that opens in any CAD or DXF viewer. Design outputs also prints a report, prints labels and prints a customer quote.
Can I bring my materials and parts across?
Your stock list comes in as a CSV into the Materials Library, and part rows paste straight into the Cut List Optimizer, tab or comma separated. What gets rebuilt here once is your cabinet library and your construction standard, which for a 32mm shop is a set of decisions you already know by heart.
Keep reading
A CabDesign page. Every product claim here was read out of the shipped code. Check every allowance against your own tooling and a scrap before cutting a run. Browse all guides.